IC Transceiver

[ Home ] [ Up ]

ADVANCE Co.

TRANSFER ELEKTRONIK

ADVANCE COMPANY

POLAND

EUROPE

CHINA

433 MHZ Single CHIP Transceiver

FEATURES

· True single chip FSK transceiver

· Few external components required

· No set up or configuration

· No coding of data required

· 20kbit/s data rate

· 2 channels

· Wide supply range

· Very low power consumption

· Standby mode

APPLICATIONS

· Alarm and Security Systems

· Automatic Meter Reading (AMR)

· Home Automation

· Remote Control

· Surveillance

· Automotive

· Telemetry

· Toys

· Wireless Communication

GENERAL DESCRIPTION

Transceiver is a true single chip UHF transceiver designed to operate in the 433MHz ISM

(Industrial, Scientific and Medical) frequency band. It features Frequency Shift

Keying (FSK) modulation and demodulation capability. Transceiver operates at bit rates

up to 20kbit/s. Transmit power can be adjusted to a maximum of 10dBm. Antenna

interface is differential and suited for low cost PCB antennas. Transceiver features a

standby mode which makes power saving easy and efficient. Transceiver operates from a

single +3-5V DC supply.

As a primary application, Transceiver is intended for UHF radio equipment in compliance

with the European Telecommunication Standard Institute (ETSI) specification

EN 300 220-1 V1.2.1.

QUICK REFERENCE DATA

Parameter Value Unit

Frequency, Channel#1/Channel#2 433.92 / 434.33 MHz

Modulation FSK

Frequency deviation ±15 kHz

Max. RF output power @ 400W, 3V 10 dBm

Sensitivity @ 400W, BR=20 kbit/s, BER<10 -3 -105 dBm

Maximum bit rate 20 kbit/s

Supply voltage 2.7 – 5.25 V

Receive supply current 250 * mA

Transmit supply current @ -10 dBm output power 8 mA

Standby supply current 8 mA

-------------------------------------------------------------------------------------------------------

Single Chip High Performance RF Transceiver CC400

Applications

· UHF wireless data transmitters and receivers

· Wireless alarm and security systems

· 418 and 433 MHz ISM band systems

· Keyless entry with acknowledgement

· Remote control systems

· Home security and automation

· Low power telemetry

· Remote metering

· Environmental control

Product Description

CC400 is a single-chip high performance, half-duplex, UHF transceiver designed for low-power and low-voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) frequency bands at 418 and 433 MHz, but can easily be programmed for operation at other frequency bands in the 300-500 MHz range.

The main operating parameters of CC400 can be programmed via a serial interface, thus making CC400 a very flexible and easy to use component. In a typical system CC400 will be used together with a microcontroller and a few external passive components.

CC400 is based on SmartRF^® technology.

Features

· Single chip RF transceiver

· Ideal for low cost short range communication

· Frequency range 300MHz to 500MHz

· High sensitivity (typical -112 dBm)

· Programmable output power up to 25mW

· Small size (SSOP-28 package)

· Low supply voltage (2.7V to 3.3V)

· Very few external components required

· FSK modulation

· Data-rate up to 9.6 kbit/s

· Suitable for both narrow and wide band systems

· Suitable for frequency hopping protocols

· Frequency-Lock indicator

· Development kit available

· Easy-to-use software for generating the CC400 configuration data